Angeline R. Brock

2025

Mikuni Jet Size Chart

Posted by

–

January 10, 2025

Mikuni Jet Size Chart – Dj150 = 1.5mm and dj175 = 1.75mm. All genuine mikuni jets are flow tested and guaranteed to be exact to the labeled size. Body (assuming it’s a genuine mikuni needle jet): If the stock series needle jet was the longer version, then.

Actual jet sizes are highlighted. Learn how to drill out and install a new pilot jet in your mikuni carburetor with the correct size chart. This style of jet has its fuel flow calibrated in the “wrong”. The jet needle (#2 in illustration) is comprised of five major elements.

Mikuni Jet Size Chart

Pilot jet (mikuni) the table below shows the last five digits of the part number for all the available pilot jets classified by size and type. Find out the differences between oem, aftermarket and fake mikuni. Afaik, mikuni and keihin label in.01mm increments, so a #200 is.200 mm, #240 is.240 etc.

19 rows to ensure that a bike runs smoothly, it is essential to use the right pilot jet size for the. Series 166 (same as series 480) overall length= 47.4mm. It’s also mikuni type 4/042.

Available in 42, 45, and. The table of orifice diameters below is mikuni published data. Dynojet jets are marked according to the diameter of the hole in the jet.

These sizes are not particularly relevant until you decide to ream a smaller size to a larger size. If the jet in the carb does not. You may get some very small pin gauges cheap if you’re lucky, but a new, calibrated.

Prox Mikuni 4/042 Series Main Jet Various Sizes (Pack of 5) Race FX B2B